LEED GAP

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
查看: 495|回复: 0
打印 上一主题 下一主题

What tasks does a contractor need to perform to achieve Indoor Environmental Qua

[复制链接]

1759

主题

1

好友

5674

积分

管理员

Rank: 9Rank: 9Rank: 9

跳转到指定楼层
楼主
发表于 2012-8-4 18:35:42 |只看该作者 |倒序浏览
试卷: LEED AP ID+C 模拟试卷D[查看]
What tasks does a contractor need to perform to achieve Indoor Environmental Quality Credit, Construction Indoor Air Quality Management Plan-During Construction?
A: Perform a building flushout using a total air volume of 14,000 cu. ft. per sq. ft. of floor
B: Protect on-site absorptive materials from moisture damage
C: Use MERV 13 filtration media for temporary air handlers
D: Install temporary ventilation units for HVAC protection

参考答案: B

本题解释:
Notes:

See Indoor Environmental Quality Credit, Construction Indoor Air Quality Management Plan-During Construction, Requirements

For this credit 3 things must be done:

1. Meet or exceed SMACNA guidelines
2. Protect on-site absorptive materials from moisture damage
3. Use MERV 8 filters at each return air grille in all permanently installed air handlers if the air handlers are used during construction

Installing temporary ventilation units helps protect HVAC systems, but is not required.

A building flushout is required for Construction IAQ Management Plan - Before Occupancy (3.2), not Construction IAQ Management Plan - During Construction (3.1).
分享到: QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
分享分享0 收藏收藏0
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

关闭

站长推荐上一条 /1 下一条

Archiver|手机版|LEED GA/LEED AP考试学习平台|版权所有|备案号(沪ICP备11019119号-2)|leedgap   

GMT+8, 2024-12-23 22:45 , Processed in 0.075506 second(s), 25 queries .

Powered by Discuz! X2.5 & Exam 1.4

© 2001-2012 Comsenz Inc.

回顶部