A lighting designer is assessing if minimum daylight measurements have been achi

PrincessWas

试卷: LEED AP ID+C 模拟试卷C[查看]
A lighting designer is assessing if minimum daylight measurements have been achieved. How must the measurements be done?
A: Measure all occupied spaces on a 10-foot grid and record the measurements on building floor plans
B: Measure all areas with direct line of site to perimeter glazing
C: Measure all areas located 20 feet inside and 10 feet to either side of each window
D: Use a computer simulation under clear sky conditions on September 21 at 9 a.m. and 2 p.m.

参考答案: A

本题解释:
Reference: Indoor Environmental Quality Credit, Daylight and Views-Daylight, Requirements, Option 3

When choosing the measurement option, measure all occupied spaces on a 10-foot grid.

Computer simulations must be done on September 21st at 9 a.m. and 3 p.m. (not 2 p.m.)

Standardized test questions will sometimes have excess or tricky information. It is important to pay close attention to both the question and answer choices.

Measuring 20 feet inside and 10 feet to either side is for thermal comfort design, not daylighting calculations.