A project team is attempting Indoor Environmental Quality Credit, Construction I

admin

试卷: LEED AP ID+C 模拟试卷A[查看]
A project team is attempting Indoor Environmental Quality Credit, Construction Indoor Air Quality Management both During Construction and Before Occupancy. The contractor will be using air quality testing to determine if contaminant levels have not been exceeded. What should occur after the final cleaning and before the baseline IAQ testing has begun?(choose 2)
A: Replacing all filtration media with MERV 13 filters
B: Installing furnishings
C: Air testing and balancing of the HVAC system
D: Completing punch list items

参考答案: BC

本题解释:
Reference: Indoor Environmental Quality Credit, Construction Indoor Air Quality Management Plan-Befo

Tune the HVAC system before any air testing begins. This way the air being measured is the same air occupants will be breathing.

Install interior fixtures and furnishings. It is not required to install movable furnishings like workstations but it is recommended. These furnishings will likely have some off gassing.

Replace filtrating media. MERV 8 filters can be used for this process - MERV 13 filters are not required. Use MERV 13 filters if the project will also be attempting Indoor Environmental Quality Credit 5, Indoor Chemical and Pollutant Source Control.
Punch list items should be completed before the final cleaning so as to not add additional dirt, contaminants, etc. to the indoors